How to Evaluate Roestvrij Staal Fabricators: 12-Point Kwaliteitscontrolelist

Belangrijkste conclusies

• Materiaal certification is non-negotiable. Any fabricator handling Roestvrij Staal must provide EN 10204 Type 3.1 mill certificates — traceability from melt to delivery.
• Lassen qualifications (WPS/PQR) separate professional fabricators from general workshops. Ask to see procedure specifications and welder qualification records before placing an order.
• Oppervlakteafwerking matters as much as fabrication. Passivering, electroPolijsten, and pickling are essential for corrosion resistance — a fabricator without in-house finishing may sub out this critical step.
• Inspectie equipment tells the real story. A spectrometer for PMI (Positive Materiaal Identification) and a CMM for dimensional verification are minimum requirements for quality-grade stainless work.
• Industry experience in your sector — food/pharma, chemical, marine, architectural — means the fabricator already understands your compliance requirements.

Introduction

Choosing a Roestvrij Staal fabricator is not like sourcing a standard steel part. Stainless is expensive, unforgiving of poor workmanship, and often destined for Toepassings where failure is not an option — food processing equipment, pharmaceutical tanks, marine structures, and chemical processing vessels.

A fabricator that produces acceptable mild steel parts may produce stainless components with weld contamination, intergranular corrosion, or dimensional distortion that renders the part scrap. The difference between a competent stainless fabricator and a general shop shows up in three areas: material handling discipline, Lassen procedure control, and post-weld Oppervlaktebehandeling.

This checklist gives you 12 concrete, verifiable criteria — not vague “years of experience” claims — to evaluate any Roestvrij Staal fabricator before you Verstuur an RFQ.

The 12-Point Evaluation Checklist at a Glance

1–3: The Lassen Triangle — WPS, PQR, and Welder Qualification

Lassen is where stainless fabrication succeeds or fails. Three documents form the quality backbone:

• WPS (Lassen Procedure Specification) — a written “recipe” specifying the Lassen process (GTAW/TIG is standard for stainless), filler metal grade (e.g., ER308L for 304, ER316L for 316), amperage range, shielding gas (argon or argon-helium mix), preheat/interpass temperature limits, and post-weld treatment.
• PQR (Procedure Qualification Record) — the test data proving the WPS works: tensile test results, bend test results, and impact test data (if required). This is the evidence, not the promise.
• WPQ/WQR (Welder Performance Qualification) — proof that each individual welder can execute the WPS. Qualifications typically expire after 6 months without continuous use of that procedure.

What to ask: “Please Verstuur your WPS and supporting PQR for GTAW on 304 roestvast staal, 2–5 mm thickness range.” A legitimate fabricator can email this within hours. A fabricator that hesitates or offers verbal assurances instead of documents fails criterion #2.

Red flag: “Our welders have 20 years of experience — they don’t need written procedures.” Experience without documented process control is the leading cause of stainless weld failure.
Green flag: The fabricator volunteers their WPS before you ask — it means quality documentation is standard operating procedure, not a special request.

4. Materiaal Segregation: Koolstofstaal Is a Contaminant

This is the most overlooked criterion — and the most common cause of stainless part rejection. Koolstofstaal particles embedded in stainless surfaces create galvanic corrosion sites that rust within weeks. A proper stainless fabricator maintains:

• Dedicated stainless tooling — wire brushes, Slijpen discs, and clamps used only on stainless (never shared with Koolstofstaal)
• Separate work areas — physical separation or strict cleaning protocols between Koolstofstaal and stainless fabrication zones
• Materiaal storage discipline — stainless sheets and bars stored on wooden or plastic racks, never in direct contact with Koolstofstaal or on the floor

What to ask: “Show me your stainless fabrication area.” On a factory visit — or a video call — look for color-coded tooling, separate Slijpen stations, and stainless stock stored off the ground. A shop where stainless and Koolstofstaal share the same bench and tooling fails this checkpoint.

5. Oppervlakteafwerking: The Corrosion Resistance Layer

Roestvrij Staal’s corrosion resistance comes from a passive chromium oxide layer on the surface. Lassen destroys this layer at the heat-affected zone. Three processes restore it:

A fabricator without in-house pickling and Passivering is outsourcing your part’s most critical quality step to an unknown third party. If they do subcontract finishing, they must demonstrate quality oversight: incoming Inspectie of finished parts, surface roughness verification, and corrosion testing records.

6–8: Inspectie & Testing — Trust but Verify

Three Inspectie capabilities separate quality-grade stainless fabricators from the rest:

PMI (Positive Materiaal Identification): A handheld XRF (X-ray fluorescence) or OES (optical emission spectrometer) gun confirms that the material is actually 316L and not 304 — or worse, a lower-grade substitute. This is especially critical when sourcing from new suppliers or dealing with thin-gauge sheet where mill markings are lost after cutting. Ask: “Do you PMI-test incoming stainless stock?”

CMM / 3D Scanning: A coordinate measuring machine provides digital dimensional reports traceable to your drawing. For complex welded Assemblages, 3D scanning captures the full geometry including weld distortion. Hand tools (calipers, height gauges) are acceptable for simple parts but insufficient for Assemblages with multiple weldments.

NDT (Nondestructive Testing): At minimum, the fabricator must perform Kleurdringtest (PT) on all structural or pressure-containing welds — this catches surface cracks invisible to the naked eye. For thick sections (>8 mm), Ultrasoon onderzoek (UT) detects subsurface defects. Radiographic testing (RT) is typically reserved for code work (Drukvaten per ASME VIII).

Best voor: Buyers who need objective, verifiable quality evidence — PMI reports, CMM dimensional data, and PT Inspectie certificates.
Avoid when: The fabricator says “trust me, we inspect everything” but cannot produce a single Inspectie report for a past job.

9. Certifications: ISO 9001 Minimum, ISO 3834 for Lassen-Intensive Work

ISO 9001 certification demonstrates that the fabricator has a documented quality management system — it niet guarantee good stainless work, but its absence guarantees no systematic Kwaliteitscontrole. For Lassen-intensive stainless fabrication, ISO 3834 (Quality Requirements for Fusion Lassen) is the relevant standard — it specifically addresses Lassen coordination, procedure qualification, and welder competence.

Verify certifications independently. Do not accept a certificate PDF at face value — check the certifying body’s online registry or ask for the certificate number and verify with the issuer. Expired certifications are a red flag unless the renewal audit is already scheduled.

10–12: References, Capacity, and Handling

Industry references: Ask for two to three clients in your sector — food processing, pharmaceutical, chemical, marine, or whatever your Toepassing is. A fabricator that has successfully served your industry already understands the specific surface finish requirements, documentation standards, and compliance regulations. Call the references and ask one question: “Would you use them again for stainless work?”

Capacity and lead time: A fabricator that says “we can start tomorrow” for a complex stainless assembly has either no work (why?) or no understanding of what you are asking for. Realistic lead times for custom stainless fabrication run 3–8 weeks from approved drawing, depending on complexity and current shop loading. Ask for their current capacity utilization percentage — above 85% means your job will likely slip.

Packaging and handling: Stainless parts must be packaged to prevent iron contamination during transit. This means plastic-wrapped, separated from Koolstofstaal items, with VCI (volatile corrosion inhibitor) paper for long-distance shipping. If your parts arrive with rust spots from contact with a Koolstofstaal pallet or steel-band strapping, the fabricator failed the final checkpoint.

Real-World Example: Food-Grade Tank Fabrication

A European food processing equipment manufacturer needed a 500-liter 316L stainless mixing tank with internal mirror polish (Ra ≤ 0.4 μm) and full-penetration TIG welds throughout. They shortlisted two fabricators:

Supplier A quoted 30% lower, claimed “extensive stainless experience,” but could not produce a WPS, had no PMI capability, and subcontracted electroPolijsten to an unnamed third party. Score: 5/12.

Supplier B quoted higher, provided WPS/PQR documentation within hours, demonstrated in-house electroPolijsten with surface roughness measurement, PMI-tested all incoming 316L sheets, and gave three food-industry references including one that permitted a site visit. Score: 11/12.

The client chose Supplier B. The initial unit cost was higher, but Supplier A’s quote did not include the cost of a rejected tank, Productie downtime, or contamination risk to end customers. The total cost of ownership favored the qualified fabricator door a 3:1 margin.

Conclusie

Evaluating Roestvrij Staal fabricators is not about finding the lowest price — it is about finding a partner who will not put your product, your schedule, or your reputation at risk. The 12-point checklist gives you an objective framework to separate qualified fabricators from general workshops before you commit to an order.

Start with the Lassen triangle (WPS/PQR/WPQ), verify material segregation practices, and insist on documented Inspectie results — not verbal assurances. A Roestvrij Staal fabricator that passes 10 of 12 checkpoints with verifiable evidence is a supplier worth building a long-term relationship with.