{"id":3001,"date":"2026-08-04T22:25:00","date_gmt":"2026-08-04T14:25:00","guid":{"rendered":"https:\/\/bravofabs.com\/evaluate-stainless-steel-fabricators-checklist\/"},"modified":"2026-08-05T06:25:00","modified_gmt":"2026-08-04T22:25:00","slug":"evaluate-stainless-steel-fabricators-checklist","status":"publish","type":"post","link":"https:\/\/bravofabs.com\/evaluate-stainless-steel-fabricators-checklist\/","title":{"rendered":"How to Evaluate Stainless Steel Fabricators: 12-Point Quality Checklist"},"content":{"rendered":"\n<h2 class=\"wp-block-heading\">Key Takeaways<\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Material certification is non-negotiable.<\/strong> Any fabricator handling stainless steel must provide EN 10204 Type 3.1 mill certificates \u2014 traceability from melt to delivery.<\/li>\n<li><strong>Welding qualifications (WPS\/PQR)<\/strong> separate professional fabricators from general workshops. Ask to see procedure specifications and welder qualification records before placing an order.<\/li>\n<li><strong>Surface finishing matters as much as fabrication.<\/strong> Passivation, electropolishing, and pickling are essential for corrosion resistance \u2014 a fabricator without in-house finishing may sub out this critical step.<\/li>\n<li><strong>Inspection equipment tells the real story.<\/strong> A spectrometer for PMI (Positive Material Identification) and a CMM for dimensional verification are minimum requirements for quality-grade stainless work.<\/li>\n<li><strong>Industry experience in your sector<\/strong> \u2014 food\/pharma, chemical, marine, architectural \u2014 means the fabricator already understands your compliance requirements.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Introduction<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Choosing a stainless steel fabricator is not like sourcing a standard steel part. Stainless is expensive, unforgiving of poor workmanship, and often destined for applications where failure is not an option \u2014 food processing equipment, pharmaceutical tanks, marine structures, and chemical processing vessels.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A fabricator that produces acceptable mild steel parts may produce stainless components with <strong>weld contamination, intergranular corrosion, or dimensional distortion<\/strong> that renders the part scrap. The difference between a competent stainless fabricator and a general shop shows up in three areas: <strong>material handling discipline, welding procedure control, and post-weld surface treatment<\/strong>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This checklist gives you 12 concrete, verifiable criteria \u2014 not vague &#8220;years of experience&#8221; claims \u2014 to evaluate any stainless steel fabricator before you send an RFQ.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">The 12-Point Evaluation Checklist at a Glance<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table style=\"width:100%;border-collapse:collapse;margin:15px 0\"><thead><tr style=\"background:#004c97;color:#fff\"><th style=\"padding:10px;text-align:left\">#<\/th><th style=\"padding:10px;text-align:left\">Checkpoint<\/th><th style=\"padding:10px;text-align:left\">What to Ask For<\/th><th style=\"padding:10px;text-align:left\">Red Flag<\/th><\/tr><\/thead><tbody><tr style=\"border-bottom:1px solid #e5e5e5\"><td style=\"padding:8px\"><strong>1<\/strong><\/td><td style=\"padding:8px\">Material Certifications<\/td><td style=\"padding:8px\">EN 10204 3.1 mill certs for 304\/316<\/td><td style=\"padding:8px\">&#8220;We buy from trusted suppliers&#8221; \u2014 no paper trail<\/td><\/tr><tr style=\"border-bottom:1px solid #e5e5e5\"><td style=\"padding:8px\"><strong>2<\/strong><\/td><td style=\"padding:8px\">Welding Procedures (WPS)<\/td><td style=\"padding:8px\">Documented WPS per ASME IX or ISO 15614<\/td><td style=\"padding:8px\">No written procedures; &#8220;the welder knows what to do&#8221;<\/td><\/tr><tr style=\"border-bottom:1px solid #e5e5e5\"><td style=\"padding:8px\"><strong>3<\/strong><\/td><td style=\"padding:8px\">Welder Qualifications<\/td><td style=\"padding:8px\">WPQ\/WQR records, valid within 6 months<\/td><td style=\"padding:8px\">Expired or missing qualification records<\/td><\/tr><tr style=\"border-bottom:1px solid #e5e5e5\"><td style=\"padding:8px\"><strong>4<\/strong><\/td><td style=\"padding:8px\">Stainless-Only Tooling<\/td><td style=\"padding:8px\">Dedicated stainless workspace or confirmed segregation<\/td><td style=\"padding:8px\">Carbon steel and stainless fabricated on same bench<\/td><\/tr><tr style=\"border-bottom:1px solid #e5e5e5\"><td style=\"padding:8px\"><strong>5<\/strong><\/td><td style=\"padding:8px\">Surface Finishing<\/td><td style=\"padding:8px\">In-house passivation, pickling, or electropolishing<\/td><td style=\"padding:8px\">&#8220;We send it out for finishing&#8221; with no quality oversight<\/td><\/tr><tr style=\"border-bottom:1px solid #e5e5e5\"><td style=\"padding:8px\"><strong>6<\/strong><\/td><td style=\"padding:8px\">PMI Capability<\/td><td style=\"padding:8px\">Handheld XRF or OES spectrometer on-site<\/td><td style=\"padding:8px\">Cannot verify alloy grade before fabrication<\/td><\/tr><tr style=\"border-bottom:1px solid #e5e5e5\"><td style=\"padding:8px\"><strong>7<\/strong><\/td><td style=\"padding:8px\">Dimensional Inspection<\/td><td style=\"padding:8px\">CMM or 3D scanning capability<\/td><td style=\"padding:8px\">Hand tools only \u2014 no digital dimensional records<\/td><\/tr><tr style=\"border-bottom:1px solid #e5e5e5\"><td style=\"padding:8px\"><strong>8<\/strong><\/td><td style=\"padding:8px\">NDT (Nondestructive Testing)<\/td><td style=\"padding:8px\">Dye penetrant (PT) for welds, UT for thick sections<\/td><td style=\"padding:8px\">Visual inspection only for load-bearing welds<\/td><\/tr><tr style=\"border-bottom:1px solid #e5e5e5\"><td style=\"padding:8px\"><strong>9<\/strong><\/td><td style=\"padding:8px\">ISO Certification<\/td><td style=\"padding:8px\">ISO 9001 minimum; ISO 3834 for welding-intensive work<\/td><td style=\"padding:8px\">&#8220;We follow ISO standards&#8221; without actual certification<\/td><\/tr><tr style=\"border-bottom:1px solid #e5e5e5\"><td style=\"padding:8px\"><strong>10<\/strong><\/td><td style=\"padding:8px\">Industry References<\/td><td style=\"padding:8px\">2\u20133 client references in your sector<\/td><td style=\"padding:8px\">Cannot name a single relevant client<\/td><\/tr><tr style=\"border-bottom:1px solid #e5e5e5\"><td style=\"padding:8px\"><strong>11<\/strong><\/td><td style=\"padding:8px\">Capacity &amp; Lead Time<\/td><td style=\"padding:8px\">Current shop loading; realistic lead time commitment<\/td><td style=\"padding:8px\">&#8220;We can start tomorrow&#8221; for complex work<\/td><\/tr><tr style=\"border-bottom:1px solid #e5e5e5\"><td style=\"padding:8px\"><strong>12<\/strong><\/td><td style=\"padding:8px\">Packaging &amp; Handling<\/td><td style=\"padding:8px\">Stainless-specific packaging (no carbon steel contact)<\/td><td style=\"padding:8px\">Parts shipped loose with carbon steel items<\/td><\/tr><\/tbody><\/table><figcaption class=\"wp-element-caption\">The complete 12-point checklist. A competent stainless fabricator should pass at least 10 of 12. Score 8 or below means elevated risk. Detailed evaluation criteria for each checkpoint follow below.<\/figcaption><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">1\u20133: The Welding Triangle \u2014 WPS, PQR, and Welder Qualification<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Welding is where stainless fabrication succeeds or fails. Three documents form the quality backbone:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>WPS (Welding Procedure Specification)<\/strong> \u2014 a written &#8220;recipe&#8221; specifying the welding process (GTAW\/TIG is standard for stainless), filler metal grade (e.g., ER308L for 304, ER316L for 316), amperage range, shielding gas (argon or argon-helium mix), preheat\/interpass temperature limits, and post-weld treatment.<\/li>\n<li><strong>PQR (Procedure Qualification Record)<\/strong> \u2014 the test data proving the WPS works: tensile test results, bend test results, and impact test data (if required). This is the evidence, not the promise.<\/li>\n<li><strong>WPQ\/WQR (Welder Performance Qualification)<\/strong> \u2014 proof that each individual welder can execute the WPS. Qualifications typically expire after 6 months without continuous use of that procedure.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>What to ask:<\/strong> &#8220;Please send your WPS and supporting PQR for GTAW on 304 stainless, 2\u20135 mm thickness range.&#8221; A legitimate fabricator can email this within hours. A fabricator that hesitates or offers verbal assurances instead of documents fails criterion #2.<\/p>\n\n\n\n<p class=\"has-background wp-block-paragraph\" style=\"background-color:#f8f9fb;padding-top:10px;padding-right:14px;padding-bottom:10px;padding-left:14px\"><strong>Red flag:<\/strong> &#8220;Our welders have 20 years of experience \u2014 they don&#8217;t need written procedures.&#8221; Experience without documented process control is the leading cause of stainless weld failure.<br><strong>Green flag:<\/strong> The fabricator volunteers their WPS before you ask \u2014 it means quality documentation is standard operating procedure, not a special request.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">4. Material Segregation: Carbon Steel Is a Contaminant<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">This is the most overlooked criterion \u2014 and the most common cause of stainless part rejection. Carbon steel particles embedded in stainless surfaces create <strong>galvanic corrosion sites<\/strong> that rust within weeks. A proper stainless fabricator maintains:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Dedicated stainless tooling<\/strong> \u2014 wire brushes, grinding discs, and clamps used only on stainless (never shared with carbon steel)<\/li>\n<li><strong>Separate work areas<\/strong> \u2014 physical separation or strict cleaning protocols between carbon steel and stainless fabrication zones<\/li>\n<li><strong>Material storage discipline<\/strong> \u2014 stainless sheets and bars stored on wooden or plastic racks, never in direct contact with carbon steel or on the floor<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>What to ask:<\/strong> &#8220;Show me your stainless fabrication area.&#8221; On a factory visit \u2014 or a video call \u2014 look for color-coded tooling, separate grinding stations, and stainless stock stored off the ground. A shop where stainless and carbon steel share the same bench and tooling fails this checkpoint.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">5. Surface Finishing: The Corrosion Resistance Layer<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Stainless steel&#8217;s corrosion resistance comes from a <strong>passive chromium oxide layer<\/strong> on the surface. Welding destroys this layer at the heat-affected zone. Three processes restore it:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table style=\"width:100%;border-collapse:collapse;margin:15px 0\"><thead><tr style=\"background:#004c97;color:#fff\"><th style=\"padding:10px;text-align:left\">Process<\/th><th style=\"padding:10px;text-align:left\">What It Does<\/th><th style=\"padding:10px;text-align:left\">Required For<\/th><\/tr><\/thead><tbody><tr style=\"border-bottom:1px solid #e5e5e5\"><td style=\"padding:8px\"><strong>Pickling<\/strong><\/td><td style=\"padding:8px\">Chemical removal of weld oxide scale and chromium-depleted layer<\/td><td style=\"padding:8px\">All welded stainless \u2014 minimum post-weld treatment<\/td><\/tr><tr style=\"border-bottom:1px solid #e5e5e5\"><td style=\"padding:8px\"><strong>Passivation<\/strong><\/td><td style=\"padding:8px\">Nitric or citric acid treatment to rebuild the passive chromium oxide layer<\/td><td style=\"padding:8px\">Food, pharma, and marine applications<\/td><\/tr><tr style=\"border-bottom:1px solid #e5e5e5\"><td style=\"padding:8px\"><strong>Electropolishing<\/strong><\/td><td style=\"padding:8px\">Electrochemical process removing a thin surface layer; creates mirror finish + maximum corrosion resistance<\/td><td style=\"padding:8px\">Semiconductor, ultra-high-purity, pharmaceutical vessels<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">A fabricator without <strong>in-house pickling and passivation<\/strong> is outsourcing your part&#8217;s most critical quality step to an unknown third party. If they do subcontract finishing, they must demonstrate quality oversight: incoming inspection of finished parts, surface roughness verification, and corrosion testing records.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">6\u20138: Inspection &amp; Testing \u2014 Trust but Verify<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Three inspection capabilities separate quality-grade stainless fabricators from the rest:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>PMI (Positive Material Identification):<\/strong> A handheld XRF (X-ray fluorescence) or OES (optical emission spectrometer) gun confirms that the material is actually 316L and not 304 \u2014 or worse, a lower-grade substitute. This is especially critical when sourcing from new suppliers or dealing with thin-gauge sheet where mill markings are lost after cutting. Ask: &#8220;Do you PMI-test incoming stainless stock?&#8221;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>CMM \/ 3D Scanning:<\/strong> A coordinate measuring machine provides digital dimensional reports traceable to your drawing. For complex welded assemblies, 3D scanning captures the full geometry including weld distortion. Hand tools (calipers, height gauges) are acceptable for simple parts but insufficient for assemblies with multiple weldments.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>NDT (Nondestructive Testing):<\/strong> At minimum, the fabricator must perform <strong>dye penetrant testing (PT)<\/strong> on all structural or pressure-containing welds \u2014 this catches surface cracks invisible to the naked eye. For thick sections (>8 mm), <strong>ultrasonic testing (UT)<\/strong> detects subsurface defects. Radiographic testing (RT) is typically reserved for code work (pressure vessels per ASME VIII).<\/p>\n\n\n\n<p class=\"has-background wp-block-paragraph\" style=\"background-color:#f8f9fb;padding-top:10px;padding-right:14px;padding-bottom:10px;padding-left:14px\"><strong>Best for:<\/strong> Buyers who need objective, verifiable quality evidence \u2014 PMI reports, CMM dimensional data, and PT inspection certificates.<br><strong>Avoid when:<\/strong> The fabricator says &#8220;trust me, we inspect everything&#8221; but cannot produce a single inspection report for a past job.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">9. Certifications: ISO 9001 Minimum, ISO 3834 for Welding-Intensive Work<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">ISO 9001 certification demonstrates that the fabricator has a documented quality management system \u2014 it does not guarantee good stainless work, but its absence guarantees no systematic quality control. For welding-intensive stainless fabrication, <strong>ISO 3834 (Quality Requirements for Fusion Welding)<\/strong> is the relevant standard \u2014 it specifically addresses welding coordination, procedure qualification, and welder competence.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Verify certifications independently.<\/strong> Do not accept a certificate PDF at face value \u2014 check the certifying body&#8217;s online registry or ask for the certificate number and verify with the issuer. Expired certifications are a red flag unless the renewal audit is already scheduled.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">10\u201312: References, Capacity, and Handling<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Industry references:<\/strong> Ask for two to three clients in your sector \u2014 food processing, pharmaceutical, chemical, marine, or whatever your application is. A fabricator that has successfully served your industry already understands the specific surface finish requirements, documentation standards, and compliance regulations. Call the references and ask one question: &#8220;Would you use them again for stainless work?&#8221;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Capacity and lead time:<\/strong> A fabricator that says &#8220;we can start tomorrow&#8221; for a complex stainless assembly has either no work (why?) or no understanding of what you are asking for. Realistic lead times for custom stainless fabrication run 3\u20138 weeks from approved drawing, depending on complexity and current shop loading. Ask for their current capacity utilization percentage \u2014 above 85% means your job will likely slip.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Packaging and handling:<\/strong> Stainless parts must be packaged to prevent <strong>iron contamination during transit<\/strong>. This means plastic-wrapped, separated from carbon steel items, with VCI (volatile corrosion inhibitor) paper for long-distance shipping. If your parts arrive with rust spots from contact with a carbon steel pallet or steel-band strapping, the fabricator failed the final checkpoint.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Real-World Example: Food-Grade Tank Fabrication<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A European food processing equipment manufacturer needed a 500-liter 316L stainless mixing tank with internal mirror polish (Ra \u2264 0.4 \u03bcm) and full-penetration TIG welds throughout. They shortlisted two fabricators:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Supplier A<\/strong> quoted 30% lower, claimed &#8220;extensive stainless experience,&#8221; but could not produce a WPS, had no PMI capability, and subcontracted electropolishing to an unnamed third party. Score: 5\/12.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Supplier B<\/strong> quoted higher, provided WPS\/PQR documentation within hours, demonstrated in-house electropolishing with surface roughness measurement, PMI-tested all incoming 316L sheets, and gave three food-industry references including one that permitted a site visit. Score: 11\/12.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The client chose Supplier B. The initial unit cost was higher, but Supplier A&#8217;s quote did not include the cost of a rejected tank, production downtime, or contamination risk to end customers. The total cost of ownership favored the qualified fabricator by a 3:1 margin.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Conclusion<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Evaluating stainless steel fabricators is not about finding the lowest price \u2014 it is about finding a partner who will not put your product, your schedule, or your reputation at risk. The 12-point checklist gives you an objective framework to separate qualified fabricators from general workshops before you commit to an order.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Start with the welding triangle (WPS\/PQR\/WPQ), verify material segregation practices, and insist on documented inspection results \u2014 not verbal assurances. A <strong><a href=\"https:\/\/bravofabs.com\/stainless-steel-fabrication-guide\/\">stainless steel fabricator<\/a><\/strong> that passes 10 of 12 checkpoints with verifiable evidence is a supplier worth building a long-term relationship with.<\/p>\n\n\n\n<div class=\"wp-block-group has-light-gray-background-color has-background is-layout-constrained wp-container-core-group-is-layout-e86b207e wp-block-group-is-layout-constrained\" style=\"border-color:#1e73be;border-width:2px;padding-top:20px;padding-right:24px;padding-bottom:20px;padding-left:24px\">\n\n\n<h3 class=\"wp-block-heading\">Need a Qualified Stainless Steel Fabricator? Get a Quote<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">BravoFabs provides ISO-certified stainless steel fabrication with documented WPS, in-house TIG welding, PMI material verification, and full passivation\/pickling capability. We serve industrial clients in Germany, the US, and across Europe with <strong>complete material traceability from mill cert to finished part<\/strong>. Send your RFQ for a competitive quote with free DFM review.<\/p>\n\n\n\n<div class=\"wp-block-buttons is-layout-flex wp-block-buttons-is-layout-flex\">\n\n<div class=\"wp-block-button\"><a class=\"wp-block-button__link has-white-color has-vivid-cyan-blue-background-color has-text-color has-background wp-element-button\" href=\"https:\/\/bravofabs.com\/contact\/\" style=\"border-radius:6px\">Request a Stainless Steel Quote \u2192<\/a><\/div>\n\n<\/div>\n\n\n<\/div>\n\n\n\n<div class=\"wp-block-group is-layout-constrained wp-container-core-group-is-layout-cbfb3306 wp-block-group-is-layout-constrained\" style=\"border-left-color:#2563eb;border-left-width:4px;border-left-style:solid;background-color:#f0f4ff;margin-top:32px;margin-bottom:0;padding-top:12px;padding-bottom:12px;padding-left:20px;padding-right:24px\">\n\n<h4 class=\"wp-block-heading\" style=\"font-size:15px;font-style:normal;font-weight:700;line-height:1.4;margin-top:0;margin-bottom:8px\">\ud83d\udd17 Related Manufacturing Services &amp; Articles<\/h4>\n\n\n\n<ul class=\"wp-block-list\" style=\"font-size:14px;line-height:1.7;padding-left:18px\">\n<li><strong><a href=\"https:\/\/bravofabs.com\/sheet-metal-fabrication-services\/\">Sheet Metal Fabrication Services<\/a><\/strong> \u2014 precision stainless steel bending, cutting &amp; welding<\/li>\n<li><strong><a href=\"https:\/\/bravofabs.com\/cnc-machining-service\/\">CNC Machining Service<\/a><\/strong> \u2014 tight-tolerance CNC milling &amp; turning for stainless components<\/li>\n<li><strong><a href=\"https:\/\/bravofabs.com\/stainless-steel-fabrication-guide\/\">Stainless Steel Fabrication Guide<\/a><\/strong> \u2014 grades, welding methods &amp; surface finishes explained<\/li>\n<li><strong><a href=\"https:\/\/bravofabs.com\/surface-finishing-guide-anodizing-powder-coating\/\">Surface Finishing Guide<\/a><\/strong> \u2014 passivation, anodizing &amp; powder coating compared<\/li>\n<li><strong><a href=\"https:\/\/bravofabs.com\/quality-control-in-metal-fabrication\/\">Quality Control in Metal Fabrication<\/a><\/strong> \u2014 inspection tools, standards &amp; CMM explained<\/li>\n<\/ul>\n\n<\/div>\n\n<div class=\"rs-section\"><div class=\"rs-container\"><h2>Explore Related Manufacturing Services<\/h2><div class=\"rs-grid\"><div class=\"rs-card\"><a href=\"\/cnc-machining-services\/\">CNC Machining Services<\/a><p>Precision CNC milling, turning &amp; 5-axis machining.<\/p><\/div><div class=\"rs-card\"><a href=\"\/sheet-metal-fabrication-services\/\">Sheet Metal Fabrication<\/a><p>Laser cutting, bending, welding &amp; assembly.<\/p><\/div><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>Key Takeaways Material certification is non-negotiable. Any fabricator handling stainless steel must provide EN 10204 Type 3.1 mill certificates \u2014 traceability from melt to delivery. Welding qualifications (WPS\/PQR) separate professional fabricators from general workshops. Ask to see procedure specifications and welder qualification records before placing an order. Surface finishing matters as much as fabrication. Passivation, [&hellip;]<\/p>\n","protected":false},"author":0,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_seopress_titles_title":"12-Point Stainless Steel Fabricator Checklist | BravoFabs","_seopress_titles_desc":"12-point checklist for evaluating stainless steel fabricators. Covers WPS, material certs, PMI, surface finishing, NDT &amp; ISO. Free quote.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"","_seopress_redirections_param":"","_seopress_redirections_type":0,"_seopress_analysis_target_kw":"stainless steel fabricators","footnotes":""},"categories":[40],"tags":[],"class_list":["post-3001","post","type-post","status-publish","format-standard","category-knowledge-base"],"_links":{"self":[{"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/posts\/3001","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/types\/post"}],"replies":[{"embeddable":true,"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/comments?post=3001"}],"version-history":[{"count":0,"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/posts\/3001\/revisions"}],"wp:attachment":[{"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/media?parent=3001"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/categories?post=3001"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/tags?post=3001"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}