{"id":1272,"date":"2026-07-16T12:55:00","date_gmt":"2026-07-16T13:11:39","guid":{"rendered":"https:\/\/bravofabs.com\/?p=1272"},"modified":"2026-10-21T19:30:56","modified_gmt":"2026-10-21T11:30:56","slug":"cmm-in-metal-fabrication","status":"publish","type":"post","link":"https:\/\/bravofabs.com\/cmm-in-metal-fabrication\/","title":{"rendered":"How does a Coordinate Measuring Machine (CMM) work in metal fabrication?"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">When a machined part has a bore that must accept a precision bearing with 0.01 mm of clearance, a caliper won&#8217;t cut it. You need to know \u2014 with documented certainty \u2014 that the diameter, roundness, and position of that bore all fall within tolerance. That&#8217;s where a <strong>Coordinate Measuring Machine (CMM)<\/strong> comes in.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">At BravoFabs, we use a Mitutoyo CRYSTA-Apex CMM capable of \u00b11.7 \u03bcm accuracy to inspect everything from simple brackets to complex aerospace components. This article explains how CMMs work, the different types available, how probe selection affects measurement results, and what you should look for in a CMM inspection report.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What Is a Coordinate Measuring Machine (CMM)?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A Coordinate Measuring Machine is a precision measurement device that determines the geometry of a physical object by probing discrete points on its surface within a three-dimensional coordinate system (X, Y, and Z axes). Unlike a caliper or micrometer \u2014 which measures one dimension at a time \u2014 a CMM captures the <em>spatial relationship<\/em> between features: the distance between two holes, the perpendicularity of a face to a bore, the flatness of a sealing surface.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In metal fabrication, CMMs serve three primary roles:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Quality control:<\/strong> Verifying that manufactured parts match the engineering drawing or 3D CAD model<\/li>\n<li><strong>First Article Inspection (FAI):<\/strong> Documenting every dimension on the first part from a new production run before full production begins<\/li>\n<li><strong>Reverse engineering:<\/strong> Capturing the geometry of an existing part to create a CAD model when no drawing exists<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Types of Coordinate Measuring Machines<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Not all CMMs are the same. The right type depends on part size, required accuracy, and whether the machine lives on the shop floor or in a climate-controlled inspection lab:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Type<\/th><th>Design<\/th><th>Best For<\/th><th>Typical Accuracy<\/th><\/tr><\/thead><tbody><tr><td><strong>Bridge CMM<\/strong><\/td><td>Moving bridge over a fixed granite table<\/td><td>Small-to-medium precision parts (the most common type)<\/td><td>\u00b11.0 \u2013 3.0 \u03bcm<\/td><\/tr><tr><td><strong>Gantry CMM<\/strong><\/td><td>Bridge supported by two elevated legs, workpiece stays fixed<\/td><td>Large parts (automotive body panels, weldments >1 m)<\/td><td>\u00b13.0 \u2013 10.0 \u03bcm<\/td><\/tr><tr><td><strong>Cantilever CMM<\/strong><\/td><td>Probe arm extends from one side only, open on three sides<\/td><td>Long, narrow parts; easy operator access<\/td><td>\u00b13.0 \u2013 8.0 \u03bcm<\/td><\/tr><tr><td><strong>Horizontal Arm CMM<\/strong><\/td><td>Horizontal probe arm, often dual-arm for simultaneous measurement<\/td><td>Large sheet metal parts, automotive body-in-white<\/td><td>\u00b15.0 \u2013 15.0 \u03bcm<\/td><\/tr><tr><td><strong>Portable CMM<\/strong><\/td><td>Articulated arm or laser tracker, no fixed table<\/td><td>On-site inspection, large assemblies that can&#8217;t move<\/td><td>\u00b110.0 \u2013 50.0 \u03bcm<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">BravoFabs uses a <strong>bridge-type CMM<\/strong> \u2014 the Mitutoyo CRYSTA-Apex \u2014 which provides the best balance of accuracy and versatility for the precision CNC parts we produce daily.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">How a CMM Takes a Measurement<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The measurement process follows a logical sequence:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li><strong>Setup and alignment:<\/strong> The part is fixtured on the granite table. The CMM establishes a coordinate system by touching known reference surfaces (datums) \u2014 typically the same datums specified on the engineering drawing.<\/li>\n<li><strong>Probe qualification:<\/strong> Before measuring, the probe stylus is calibrated against a precision reference sphere of known diameter. This compensates for stylus tip radius and any probe head misalignment.<\/li>\n<li><strong>Program execution:<\/strong> The CMM follows a pre-written measurement program (or manual joystick control) to touch specific points on the part. For a bore, it might take 8-12 points around the circumference. For a flat surface, 5-9 distributed points.<\/li>\n<li><strong>Data computation:<\/strong> The CMM software fits geometric features to the measured points \u2014 calculating diameter from a circle fit, flatness from a plane fit, position from coordinates relative to datums.<\/li>\n<li><strong>Report generation:<\/strong> Each measured feature is compared to its nominal dimension and tolerance. Out-of-tolerance values are flagged in red. The final report is exported as PDF or CSV for the client.<\/li>\n<\/ol>\n\n\n\n<h2 class=\"wp-block-heading\">CMM Probes: Contact vs. Non-Contact<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The probe is the CMM&#8217;s &#8220;finger&#8221; \u2014 and the choice of probe technology directly affects measurement speed, accuracy, and what features you can measure:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Probe Type<\/th><th>Method<\/th><th>Speed<\/th><th>Accuracy<\/th><th>Best For<\/th><\/tr><\/thead><tbody><tr><td><strong>Touch-Trigger<\/strong><\/td><td>Ruby-tipped stylus makes physical contact at discrete points<\/td><td>Medium<\/td><td>\u00b10.5 \u2013 2.0 \u03bcm<\/td><td>Standard dimensional inspection \u2014 holes, edges, planes<\/td><\/tr><tr><td><strong>Scanning<\/strong><\/td><td>Stylus maintains continuous contact while traversing the surface<\/td><td>Fast<\/td><td>\u00b11.0 \u2013 3.0 \u03bcm<\/td><td>Complex contours, profile tolerances, thousands of data points<\/td><\/tr><tr><td><strong>Laser Line<\/strong><\/td><td>Non-contact laser stripe projected onto surface, camera captures profile<\/td><td>Very Fast<\/td><td>\u00b15.0 \u2013 15.0 \u03bcm<\/td><td>Sheet metal, soft materials, high-volume scanning<\/td><\/tr><tr><td><strong>Vision\/Optical<\/strong><\/td><td>Camera with magnification captures 2D features<\/td><td>Fast<\/td><td>\u00b11.0 \u2013 5.0 \u03bcm<\/td><td>Small features, edge detection, parts too delicate to touch<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">For most CNC machined metal parts, <strong>touch-trigger probing<\/strong> remains the gold standard \u2014 it offers the highest accuracy and works reliably on reflective or dark surfaces that can confuse optical systems. At BravoFabs, we primarily use touch-trigger probes with ruby styli ranging from 1 mm to 5 mm diameter, selected based on the smallest feature that needs to be accessed.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">CMM Accuracy and ISO 10360 Calibration<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">CMM accuracy is defined by <strong>ISO 10360<\/strong>, the international standard for CMM acceptance and reverification testing. The key metric is <strong>MPE (Maximum Permissible Error)<\/strong> \u2014 the worst-case measurement error the machine is allowed to produce.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The two most common MPE specifications you&#8217;ll see on a calibration certificate:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Specification<\/th><th>What It Measures<\/th><th>Example Value<\/th><\/tr><\/thead><tbody><tr><td><strong>MPE<sub>E<\/sub><\/strong><\/td><td>Volumetric length measurement error \u2014 how accurately the CMM measures a known distance in 3D space<\/td><td>\u00b1(1.7 + 3L\/1000) \u03bcm<\/td><\/tr><tr><td><strong>MPE<sub>P<\/sub><\/strong><\/td><td>Probing error \u2014 the scatter of repeated probe touches on a calibrated sphere<\/td><td>\u00b11.7 \u03bcm<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>How to read the MPE formula:<\/strong> For a 100 mm feature length, MPE<sub>E<\/sub> = \u00b1(1.7 + 3\u00d7100\/1000) = \u00b12.0 \u03bcm. For a 500 mm feature, it becomes \u00b1(1.7 + 3\u00d7500\/1000) = \u00b13.2 \u03bcm. The error grows slightly with distance \u2014 which is why very long parts need gantry CMMs with different MPE characteristics.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Our Mitutoyo CRYSTA-Apex is calibrated quarterly to <strong>NIST-traceable standards<\/strong> per ISO 10360-2. The calibration certificate is available for client review \u2014 you should always ask your manufacturer for this if you&#8217;re ordering tolerance-critical parts.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">CMM vs. Manual Measurement: Why It Matters<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A skilled inspector with a micrometer can measure a diameter accurately. But can they measure the <em>position<\/em> of that diameter relative to Datums A, B, and C? Can they verify that a surface profile tolerance of 0.1 mm is met across a complex curved surface? That&#8217;s where CMM inspection becomes essential:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Capability<\/th><th>Manual (Caliper\/Mic)<\/th><th>CMM<\/th><\/tr><\/thead><tbody><tr><td>Linear dimension (length, diameter)<\/td><td>\u2705 \u00b10.02 mm<\/td><td>\u2705 \u00b10.002 mm<\/td><\/tr><tr><td>GD&amp;T position tolerance<\/td><td>\u274c Cannot measure directly<\/td><td>\u2705 Computes from coordinates<\/td><\/tr><tr><td>Surface profile (complex curves)<\/td><td>\u274c Requires custom gauge<\/td><td>\u2705 Scanning probe captures full contour<\/td><\/tr><tr><td>Flatness \/ parallelism<\/td><td>\u26a0\ufe0f Indicator + surface plate<\/td><td>\u2705 Plane fit from multiple points<\/td><\/tr><tr><td>Measurement speed (per feature)<\/td><td>10 \u2013 30 seconds<\/td><td>2 \u2013 5 seconds<\/td><\/tr><tr><td>Documentation<\/td><td>Handwritten or Excel<\/td><td>Automated report with CAD overlay<\/td><\/tr><tr><td>Operator skill dependence<\/td><td>High \u2014 results vary between inspectors<\/td><td>Low \u2014 program-driven, repeatable<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The bottom line: if your drawing has <strong>GD&amp;T callouts<\/strong> (position tolerances, profile tolerances, runout) or <strong>tight tolerances below \u00b10.05 mm<\/strong>, CMM inspection isn&#8217;t optional \u2014 it&#8217;s the only way to verify those requirements with documented evidence.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">BravoFabs CMM Capabilities<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Our inspection lab is equipped with:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Equipment<\/th><th>Specification<\/th><\/tr><\/thead><tbody><tr><td>CMM<\/td><td>Mitutoyo CRYSTA-Apex S7106 (bridge-type)<\/td><\/tr><tr><td>Measuring range<\/td><td>700 \u00d7 1000 \u00d7 600 mm (X \u00d7 Y \u00d7 Z)<\/td><\/tr><tr><td>Accuracy (MPE<sub>E<\/sub>)<\/td><td>\u00b1(1.7 + 3L\/1000) \u03bcm<\/td><\/tr><tr><td>Probing accuracy (MPE<sub>P<\/sub>)<\/td><td>\u00b11.7 \u03bcm<\/td><\/tr><tr><td>Calibration<\/td><td>Quarterly, NIST-traceable per ISO 10360-2<\/td><\/tr><tr><td>Software<\/td><td>MCOSMOS with CAD comparison module<\/td><\/tr><tr><td>Report format<\/td><td>PDF dimensional report with CAD overlay, CSV raw data on request<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Every production run at BravoFabs includes a dimensional inspection report at no extra charge. For clients requiring formal <strong>First Article Inspection Reports (FAIR) per AS9102<\/strong> \u2014 common in aerospace and medical device manufacturing \u2014 we can provide the full documentation package.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Key Takeaways<\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>A CMM doesn&#8217;t just measure size \u2014 it verifies spatial relationships.<\/strong> Position, profile, and GD&amp;T callouts require coordinate measurement; calipers and micrometers can&#8217;t do this.<\/li>\n<li><strong>Bridge-type CMMs are the industry standard for precision machined parts<\/strong> up to ~1 m in size, offering the best accuracy-to-cost ratio.<\/li>\n<li><strong>Touch-trigger probes remain the most accurate option<\/strong> for metal parts, with scanning probes adding speed for complex contours.<\/li>\n<li><strong>Always ask for the calibration certificate.<\/strong> ISO 10360 compliance and quarterly NIST-traceable calibration are non-negotiable for tolerance-critical work.<\/li>\n<li><strong>If your drawing has GD&amp;T, you need CMM verification.<\/strong> Without it, those symbols on the drawing are just decoration \u2014 no one can prove the part actually meets them.<\/li>\n<\/ul>\n\n\n\n<div class=\"wp-block-group has-light-gray-background-color has-background is-layout-constrained wp-container-core-group-is-layout-e86b207e wp-block-group-is-layout-constrained\" style=\"border-color:#1e73be;border-width:2px;padding-top:20px;padding-right:24px;padding-bottom:20px;padding-left:24px\">\n\n\n<h3 class=\"wp-block-heading\">Need CMM-Verified Parts? Get a Quote with Dimensional Report<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">BravoFabs provides CNC machining and sheet metal fabrication with full CMM inspection on every production run. Our Mitutoyo CRYSTA-Apex delivers \u00b11.7 \u03bcm accuracy with NIST-traceable calibration. Every shipment includes a dimensional inspection report \u2014 and we offer formal AS9102 FAIR documentation for aerospace and medical clients. Serving industrial customers in Germany, the US, and across Europe.<\/p>\n\n\n\n<div class=\"wp-block-buttons is-layout-flex wp-block-buttons-is-layout-flex\">\n\n<div class=\"wp-block-button\"><a class=\"wp-block-button__link has-white-color has-vivid-cyan-blue-background-color has-text-color has-background wp-element-button\" href=\"https:\/\/bravofabs.com\/contact\/\" style=\"border-radius:6px\">Request a Quote with CMM Inspection \u2192<\/a><\/div>\n\n<\/div>\n\n\n<\/div>\n\n\n\n<div class=\"wp-block-group is-layout-constrained wp-container-core-group-is-layout-cbfb3306 wp-block-group-is-layout-constrained\" style=\"border-left-color:#2563eb;border-left-width:4px;border-left-style:solid;background-color:#f0f4ff;margin-top:32px;margin-bottom:0;padding-top:12px;padding-bottom:12px;padding-left:20px;padding-right:24px\">\n\n\n<h4 class=\"wp-block-heading\" style=\"font-size:15px;font-style:normal;font-weight:700;line-height:1.4;margin-top:0;margin-bottom:8px\">\ud83d\udd17 Related Manufacturing Services &amp; Articles<\/h4>\n\n\n\n<ul class=\"wp-block-list\" style=\"font-size:14px;line-height:1.7;padding-left:18px\">\n<li><strong><a href=\"https:\/\/bravofabs.com\/cnc-machining-service\/\">Precision CNC Machining Service<\/a><\/strong> \u2014 3-axis &amp; 5-axis milling, turning, CMM-verified tolerances down to \u00b10.005 mm<\/li>\n<li><strong><a href=\"https:\/\/bravofabs.com\/quality-control-in-metal-fabrication\/\">Quality Control in Metal Fabrication<\/a><\/strong> \u2014 our full QC process from incoming inspection to final dimensional reports<\/li>\n<li><strong><a href=\"https:\/\/bravofabs.com\/qc-devices-in-metal-fabrication\/\">QC Inspection Devices for CNC Machining &amp; Metal Fabrication<\/a><\/strong> \u2014 the complete toolkit we use alongside the CMM<\/li>\n<li><strong><a href=\"https:\/\/bravofabs.com\/tolerance-standards-in-metal-fabrication\/\">Tolerance Standards: ISO 2768 &amp; ASME Y14.5 Guide<\/a><\/strong> \u2014 how to specify tolerances so CMM inspection can verify them<\/li>\n<li><strong><a href=\"https:\/\/bravofabs.com\/sheet-metal-fabrication-services\/\">Custom Sheet Metal Fabrication<\/a><\/strong> \u2014 laser cutting, bending, welding with full QC inspection<\/li>\n<\/ul>\n\n\n<\/div>\n\n\n\n<h2 class=\"wp-block-heading\">Frequently Asked Questions About CMM Inspection<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">What is a CMM used for in metal fabrication?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">A CMM probes discrete points on a part surface within a three-dimensional coordinate system to verify geometry \u2014 size, position relative to Datums A\/B\/C, surface profile and other GD&amp;T callouts. A caliper can measure a diameter; it cannot verify where that diameter sits relative to three datums, which is why coordinate measurement is required for anything beyond simple size.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Which type of CMM suits which part?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Bridge CMMs (moving bridge over a fixed granite table) are the shop and inspection-lab standard for machined parts up to roughly one metre. Gantry CMMs handle large or heavy parts, cantilever and horizontal-arm machines suit specific geometries, and portable articulated-arm CMMs bring measurement to the part when it cannot be moved.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Contact or non-contact probing?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Touch-trigger probing with a ruby stylus is the accuracy baseline on machined metal and is used for feature-to-datum verification. Scanning probes collect dense point clouds for form and profile. Optical and laser probing is faster on soft or complex surfaces but struggles with reflective finishes and deep features, so most inspection labs combine touch-trigger and scanning.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">What accuracy can a CMM hold, and how is it specified?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Accuracy is specified under ISO 10360 using MPE: MPEE for length measurement error and MPEP for probing error. Our Mitutoyo CRYSTA-Apex S7106 has a 700 \u00d7 1000 \u00d7 600 mm measuring range with MPEE of \u00b1(1.7 + 3L\/1000) \u00b5m and MPEP of \u00b11.7 \u00b5m, calibrated quarterly against NIST-traceable standards.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">How does CMM inspection fit into an order?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Inspection is planned from the drawing: datums, critical characteristics and sampling frequency are agreed before production. We then issue a dimensional report comparing measured values against nominal, either as a first-article inspection report or as per-batch sampling. CMM verification is quoted as part of the inspection step, not added after the fact.<\/p>\n\n<div class=\"rs-section\"><div class=\"rs-container\"><h2>Explore Related Manufacturing Services<\/h2><div class=\"rs-grid\"><div class=\"rs-card\"><a href=\"\/quality-control-in-metal-fabrication\/\">Quality Control in Metal Fabrication<\/a><p>QC processes, inspection tools &amp; CMM verification guide.<\/p><\/div><div class=\"rs-card\"><a href=\"\/sheet-metal-fabrication-services\/\">Sheet Metal Fabrication<\/a><p>Laser cutting, bending, welding &amp; assembly.<\/p><\/div><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"<p>A Coordinate Measuring Machine (CMM) works as a sophisticated measuring device in metal fabrication by using a probe to determine the coordinates of points on a workpiece&#8217;s surface and thereby assess the workpiece&#8217;s dimensions, geometries, and surface characteristics. &#8230;<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_seopress_titles_title":"How Does a CMM Work? Coordinate Measuring Machines in Metal Fabrication | BravoFabs","_seopress_titles_desc":"How Coordinate Measuring Machines (CMMs) verify part dimensions in metal fabrication. Covers CMM types, touch-trigger vs scanning probes, ISO 10360 accuracy, and BravoFabs Mitutoyo CRYSTA-Apex capabilities.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"none","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"both","_seopress_redirections_param":"","_seopress_redirections_type":301,"_seopress_analysis_target_kw":"coordinate measuring machine CMM metal fabrication","footnotes":""},"categories":[40],"tags":[58,59],"class_list":["post-1272","post","type-post","status-publish","format-standard","category-knowledge-base","tag-cmm","tag-coordinate-measuring-machine"],"_links":{"self":[{"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/posts\/1272","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/comments?post=1272"}],"version-history":[{"count":7,"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/posts\/1272\/revisions"}],"predecessor-version":[{"id":3067,"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/posts\/1272\/revisions\/3067"}],"wp:attachment":[{"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/media?parent=1272"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/categories?post=1272"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/bravofabs.com\/wp-json\/wp\/v2\/tags?post=1272"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}